| Author |
 Replies: 92 / Views: 12,721 |
|
|
|
Pillar of the Community
 Canada
2784 Posts |
after reading some of the book that. I got for this camera. the book has a lot of reading. I finely figured out how to set up the magnifier. next will be the micro focus. this camera is some thing else.  |
|
Pillar of the Community
United States
1298 Posts |
|
|
Pillar of the Community
Canada
2784 Posts |
thank you ham. this canon camera is different. there is a lot more to it to set. but I will get there. my little shooting device just landed all the way from California. I had been watching for one of these for quit some time. I just got it all put together. there was no instructions with it. I see I need one more piece in order to maker this work for me. once I get the piece. I will share some picture from it. have a great one
|
|
Pillar of the Community
Canada
2784 Posts |
ok went did some make shift mounts. rubber bands elastics and a cork coin mount. I have the better stuff coming here we go. you see the lens reflection on the coin. this is a pure nickel coin. the black is a shadow from the lens   |
|
Pillar of the Community
Canada
2784 Posts |
I wanted to try a new toonie and a new loonie. will have to try to adjust the lighting. these are the hard ones to do.   |
|
Pillar of the Community
Canada
9167 Posts |
I think you have nailed it with the loonie and toonie. Now tell us the setup.
|
|
Pillar of the Community
Canada
2784 Posts |
mcshilling I have one more test. the rest of the pieces will be here some time next week. the way I am doing this. if the second test works good. I will show every body how both setups work. with that one is expenses. the second will cost a little less. there is away to build the first one, for about tree quarters the cost. I would like to build one. the problem if I buy the sheet. I would have enough to build 4 of them. I would only want one. because I have the one purchased. I think I can improve this setup. I suppose I could try to sell them on ebay. when I get this done I will share with you all. plus pictures that way if any one likes they can build it |
|
Pillar of the Community
Canada
2784 Posts |
took these images with the canon tethered.   |
|
Pillar of the Community
Canada
2784 Posts |
the 2 new lights landed today. there is one person. because this is his idea. this is what he uses kanga thank you so very much. when it comes to nickel the ottlite is bang on. know the other gadget is good to a lot more expenses. I am very pleased with this canon camera. just learning how to set it. I will say it works good. some time in the next few days I will do some photos of both setups. plus pictures. I will tell you I had to buy a special paper. I hope that anyone who wants to try this can find this paper. it is very unite. if you know where there is and office supply store. you should be able to get it there. here is 2 images takes with a single lamp the canon camera and that sheet of paper   |
|
Pillar of the Community
Canada
2784 Posts |
you member with sharp eyes. you notice the different in the beads the top are larger than the bottom and sides
|
|
Pillar of the Community
Canada
2784 Posts |
you got the same thing going on the denticles.
|
|
Pillar of the Community
Canada
2784 Posts |
here's and image of a quarter. I realize I will have to modify my smile director.  |
|
Pillar of the Community
Canada
2784 Posts |
a toonie this light works good. the canon is a good camera. here is the toonie  |
|
Pillar of the Community
United States
1298 Posts |
Show us a photo of the ott light being used. What is this special paper? Hamm
|
|
Pillar of the Community
Canada
9167 Posts |
|
| |
Replies: 92 / Views: 12,721 |
First Page
Previous Page
Posted 01/15/2016 07:33 am
