Take a look at examples on the Cuds-on-Coins site. http://cuds-on-coins.com/cuds-on-u-s-coins/ "large pieces of Cud" Not sure what you mean by this. Definition: A Cud is a die break that involves the rim and at least a little bit of the adjacent field or design. The vast majority of sizable die breaks are Cuds. Cuds can assume a wide variety of shapes including ovoid, crescentic, and irregular. Most Cuds represent spontaneous brittle failure. A small minority arise as the result of impacts. No part of a design element will show on a Cud.
Also Rim Cuds and Die Cuds are taller than any other device on the coin. Even higher than the rim. Die chips are not that tall. A Die Cud is a life ending event for a die. A die chip is not. It can be used for a long time with die chips. Remember Die Cuds are on the outside edge of the die. Chips are on the internal devices. On a Die Cud, the opposite side will not be struck up on that area:
Disclaimer: While a tremendous amount of effort goes into ensuring the accuracy of the information contained in this site, Coin Community assumes no liability for errors. Copyright 2005 - 2026 Coin Community Family- all rights reserved worldwide. Use of any images or content on this website without prior written permission of Coin Community or the original lender is strictly prohibited. Contact Us | Advertise Here | Privacy Policy / Terms of Use