2017 D Lincoln Cent Struck Through Grease.

It's STILL damage, no matter how many pics you post.

Please explain exactly how this happens during the minting process.




1. Dryer Coins don't lose material, it is just displaced.

2. Your diameter is 18.8214 mm, normal is 19.05 mm, which explains the rolled edge, even if it is still in tolerance.

Send it to PCGS today. If it comes back in an error slab, I'll reimburse you. Coin's in your court. If you're right you have nothing to lose.

My friend you were wrong twice a Dryer Coin does lose material as it wears it down and two the diameter of a Lincoln Cent is .75. So given it is only 9 hundredths of an inch the copper coating is not even that thick which this coin still has on the Outer Rim if you look at the pictures so this coin is with intolerance. And a Dryer Coin doesn't get material displaced especially towards the inner part of the coin which is where the copper coating that is missing from the lip of the edge is if you look at it that is not dirt and the lettering and banner and everything is enlarged.....
All right you'll have a good time this site is the joke nobody looks at the information presented to them with any kind of logical mindset they're just full of assumptions and lack of factual knowledge.
Some of you should take a little extra time and actually look at the pictures I posted and read what I said and maybe do a little reading up on the subject because I have