| Author |
 Replies: 25 / Views: 2,332 |
Page 2 of 2
|
|
|
|
Bedrock of the Community
United States
62064 Posts |
It might be a missing cladding or carefully removed? Note the area that color is weaker on just that area. So it made have fell off post strike or was removed? But it seems odd that the rim is still the normal color?
|
|
Pillar of the Community
 United States
7174 Posts |
Pete, that's what I was thinking on the upsetting mill pushed the nickel over the copper .
|
|
Pillar of the Community
United States
5802 Posts |
Thanks for those extra images but you included images of the rim, not the edge. Maybe I should have said reeds.
The reeds are from the "Third" die used in striking coins.
Yepper Cujohn, I had a feeling that's where you were coming from. Hard to know for sure but hopefully an image of the reeds in this area might help.
Words of encouragement are one of the major food groups.
We need to consume them regularly to thrive and grow.
|
|
Moderator
United States
98653 Posts |
yes a nice edge-on image may help here.  |
|
Pillar of the Community
Canada
6244 Posts |
Is not missing clad by Mint production errors. I see remaining clad everywhere. This it is humans made simulation of the missing clad.
Sorry just an DAMAGE coin.
|
|
Valued Member
United States
59 Posts |
can someone explain to me when they get time about the process of cleaning what is allowed and what is not allowed because I have a coin I really need help a nickel but has a stain on back I wanted to remove first but heard you should never clean coins acetone doesn't count? also how do you respond to a person an answer to a question in a group post if he leaves it
|
|
Pillar of the Community
Canada
6244 Posts |
@DECOIN The best for Nickel it is boric acid boiled at 40% acid. Sure if you shrub you will damage, but you do not want so after boiling for a 2-5 min (depending of condition) you soak or past in very hot water and job is done. Personally I dry with pression air.
Acetone on cooper change the color. Silver will be more flat or mat, the gold will change in reddish.
When I look at a coin I can say if was acetone bath in a few seconds. I do not personally consider restoration this, just damage because long term will show. Very old folks.
Edited by silviosi
09/21/2022 02:14 am
|
|
Moderator
United States
56855 Posts |
As a general rule:do not clean coins unless you know what you are doing. Practice on a lot of junk coins first.
John1 
|
|
Valued Member
 United States
172 Posts |
Sorry for the picture confusion. Here you go:   |
|
Pillar of the Community
United States
7174 Posts |
Distilled water and acetone are the only accepted method of (cleaning) coins. And Verdi care for copper. You can kind of see a little copper flakes mixed in the nickel. Still going to say copper filling in a gap in the nickel layer.
|
|
Valued Member
United States
172 Posts |
Yeah I noticed that too. There's copper showing through the rim on both sides exactly where that copper streak would be if it kept going through the rim. Great call on asking for edge images. I'm now leaning more toward this being an actual mint error.
|
|
Moderator
United States
98653 Posts |
I may have to tentatively agree with this being an error with the cladding.
|
|
Pillar of the Community
United States
5802 Posts |
Thanks for the extra images. IMHO, it does look promising but this is probably one that would need to be sent in to someone for an in-hand look. The difference between damage and error can be subtle.
Words of encouragement are one of the major food groups.
We need to consume them regularly to thrive and grow.
|
|
Pillar of the Community
Canada
6244 Posts |
If was Mint error of missing clad, the rim will not has Ni. In the West we see many of those. Apparently was done in Oregon.
|
|
Pillar of the Community
United States
2740 Posts |
As silviosi correctly concluded, this is a stain.
Error coin writer and researcher.
|
|
Page 2 of 2
|
Replies: 25 / Views: 2,332 |
Page 2 of 2
|
First Page
Posted 09/20/2022 7:03 pm
