| Author |
 Replies: 17 / Views: 3,511 |
|
Pillar of the Community
Canada
2632 Posts |
Hi all Is this flawed planchet material or roller marks or? thanks    |
|
|
|
Pillar of the Community
Canada
686 Posts |
|
|
Pillar of the Community
 Canada
2632 Posts |
Thanks jg86
I figured it was probably roller marks, but why so dull, it seems to have missed the plating process or something.
|
|
Pillar of the Community
Canada
686 Posts |
Not sure on the dullness. The coin has definitely circulated, so it could just be lack of lustre due to circulation. I've seen many similar nickels from 1982-1996 over time, and never made much of it (nor did I really care, cause I only wanted the pre-82s!) Hard to tell from the pictures as well. Maybe post a full one of the coin? Might make it a bit easier for the experts to tell if it missed the plating process.
|
|
Pillar of the Community
Canada
2632 Posts |
here's a couple full views..thanks   |
|
Moderator
 Canada
10460 Posts |
You can really see roller marks on the PL 1968 and 1969 nickel dollars... check out the reverse of this coin: http://caimages.collectors.com/coin..._Almonte.jpgI don't ever recall seeing roller marks on a Canadian 5-cent of Cu-Ni composition... Try lightly wiping your coin with an acetone-soaked Q-tip (it is already circulated, and you are not going to hurt it), if they are roller marks, they'll still be there... "Discovery follows discovery, each both raising and answering questions, each ending a long search, and each providing the new instruments for a new search." -- J. Robert OppenheimerContent of this post is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported License. See: http://creativecommons.org/licenses...0/deed.en_USMy eBay store
|
|
Pillar of the Community
Canada
2632 Posts |
Here's the cleaned up version. I didnt have any acetone handy so I used brake parts cleaner then baking soda mixed with dishsoap, much cleaner but still the lines remain.   |
|
Pillar of the Community
Canada
1354 Posts |
 I would have waited until I bought acetone. |
|
Pillar of the Community
Canada
2632 Posts |
Well it didn't hurt it any, the stuff is good for cleaning lots of things. It only goes after dirt and will not hurt metal or rubber, thanks. And look how clean it is I wouldn't do that to a coin normally though.
|
|
Moderator
Canada
10460 Posts |
Baking soda? Yikes!
"Discovery follows discovery, each both raising and answering questions, each ending a long search, and each providing the new instruments for a new search." -- J. Robert OppenheimerContent of this post is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported License. See: http://creativecommons.org/licenses...0/deed.en_USMy eBay store
|
|
Pillar of the Community
Canada
2632 Posts |
SPP-Ottawa so what do think these lines are?
|
|
Pillar of the Community
Canada
2301 Posts |
Could be a lot of things. Would need to see it in hand to voice an opinion. Interesting tho. Thanks for sharing.
|
|
Pillar of the Community
Canada
2632 Posts |
Looks very simular to a some pennies I have, woody's.
Nickelsguy if I was to send it to you with return envelope and postage would you be so kind as to look it over for me.
|
|
Bedrock of the Community
United States
10045 Posts |
Given the eroded look, I think the coin was buried or otherwise subjected to a chemical reaction which brought out the grain in the metal
|
|
Moderator
Canada
10460 Posts |
The fact that this phenomena goes right through the fields and devices, and are perfectly parallel, sure looks like rolling marks to me. It might not be marks on the roller per se, but could be poorly annealed metal when the strips are being rolled...
"Discovery follows discovery, each both raising and answering questions, each ending a long search, and each providing the new instruments for a new search." -- J. Robert OppenheimerContent of this post is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported License. See: http://creativecommons.org/licenses...0/deed.en_USMy eBay store
|
|
Pillar of the Community
Canada
2632 Posts |
Considering I do have the nickel in hand and have been looking at it for over a day I say its mint damage, be it roller marks or whatever I dont believe it to be PMD at all. And the weight is bang on @ 4.60. Question is are roller marks an error?  |
| |
Replies: 17 / Views: 3,511 |
Posted 09/19/2013 12:18 am
