Usually the zincolns don't have lamination issues. They are cut from zinc stock, run through the setup mill and then plated. There is sometimes a problem with a piece of foil getting struck onto the coin. But what you have is a die crack in that area on the head.
Disclaimer: While a tremendous amount of effort goes into ensuring the accuracy of the information contained in this site, Coin Community assumes no liability for errors. Copyright 2005 - 2026 Coin Community Family- all rights reserved worldwide. Use of any images or content on this website without prior written permission of Coin Community or the original lender is strictly prohibited. Contact Us | Advertise Here | Privacy Policy / Terms of Use