Possible a very thin layer was in that device, preventing the normal forming of that device. So it would be a very minor grease struck though error. (more of a knowledge issue with no premium for this) It could also just be a contact issue on that device that made that area incuse. ( PSD) Either way it does not add value to the coin.
Disclaimer: While a tremendous amount of effort goes into ensuring the accuracy of the information contained in this site, Coin Community assumes no liability for errors. Copyright 2005 - 2026 Coin Community Family- all rights reserved worldwide. Use of any images or content on this website without prior written permission of Coin Community or the original lender is strictly prohibited. Contact Us | Advertise Here | Privacy Policy / Terms of Use