Great example of how outward flow will move the details to the outer edges and be cut away with die trimming. The dies themselves must be trimmed on the circumference because of the expansion. Then a new rim offset cut in, the die face has a beveled edged (curved) which is where these letters become shallower and disappear.
Disclaimer: While a tremendous amount of effort goes into ensuring the accuracy of the information contained in this site, Coin Community assumes no liability for errors. Copyright 2005 - 2026 Coin Community Family- all rights reserved worldwide. Use of any images or content on this website without prior written permission of Coin Community or the original lender is strictly prohibited. Contact Us | Advertise Here | Privacy Policy / Terms of Use