| Author |
Replies: 10 / Views: 6,799 |
|
|
Bedrock of the Community
United States
11951 Posts |
I have been monitoring the temperature and humidity of the room I am storing my coins in. Seems to be staying in mid 60's temp and low 30's humidity.
I am hoping someone might know the idea ranges.
|
|
|
|
Rest in Peace
United States
17900 Posts |
Humidity is more important than an average temperature. As close to 0 as is possible is of primary concern.
|
|
Rest in Peace
United States
18456 Posts |
I have to agree ,but temp. shouldn't be too high or too low either . I'm thinking about 65 degrees Fahrenheit should be good .
|
|
Moderator
 United States
188213 Posts |
It is not the temperature or humidity alone, but the potential for condensation. The chance of condensation increases with higher humidity. It also increases with higher temperature swings, think hot humid days followed by cool nights. This is why I always recommend low humidity and stable temperatures. Here is a great site I have bookmarked. Take a look at how different temperature and humidity values affect different things (particularly "Metal Corrosion")... http://www.dpcalc.org/
|
|
Bedrock of the Community
United States
19948 Posts |
Agree with jbuck, it's the wide swings that have the most adverse effect on coins.
Low humidity and constant temperature are the keys.
Lincoln Cent Lover!VERDI-CARE™ INVENTOR https://verdi.care/
|
|
Bedrock of the Community
 United States
11951 Posts |
Thanks for the replies...
I have tried to read several sites, and not getting any consistent answer.
I agree that big swings in temp would be bad.
I don't live in a desert ... thinking zero percent humidity would not be reallistic. Also I am thinking to dry might not be good on the albums.
Also, old school, to dry is not good on electronics, that are also in the room.
I have been watching all winter and the temp/RH are very stable. I will be watching what it does this summer.
I might move my temp/RH gauge the the bank box for a little while, to see what condition my coins are there.
|
|
Moderator
 United States
188213 Posts |
Quote: Also I am thinking to dry might not be good on the albums. Correct. If you look at the link I posted, extremely dry (or extremely moist) air increases chance of mechanical damage... Quote: Hygroscopic (water-absorbing) materials change size and shape depending on the amount of water they contain. These physical reactions are based on the amount of moisture in the air (RH). Maximum %EMC indicates a damp environment while Minimum %EMC identifies a dry environment. These conditions, as well as wide and/or frequent fluctuations can result in mechanical damage.
|
|
Bedrock of the Community
 United States
11951 Posts |
Nice link . Thanks Jbuck ... 
|
|
Bedrock of the Community
United States
20753 Posts |
I too agree that excessive changes in temperatures will cause more of a problem than just dehudification alone. I use a dehumidifier in my house to keep the entire house at well below 25% and as constant as possible. Also, you should remember that temperature and humidity alone are not necessarily the worst thing for coins. If you live in an area where Sulfur rich coal is used, such as a fossil power plant, the air itself is possibly full of SO2. In the Mid West organizations that use Copper for Grounding have found it slowly vanishes due to the SO2 in the air which mixed with moisture becomes an Acid. This attacks the Ground cables. Same effect on many coins. One more reason to keep coins in a safe place away from the outside elements.
|
|
Moderator
 United States
188213 Posts |
Quote: Thanks Jbuck ... You are welcome.  Quote: If you live in an area where Sulfur rich coal is used, such as a fossil power plant, the air itself is possibly full of SO2. I love my nuclear power plant. 
|
|
Pillar of the Community
Canada
4227 Posts |
Quote: Quote: If you live in an area where Sulfur rich coal is used, such as a fossil power plant, the air itself is possibly full of SO2. Our home is across the river from a pulp mill. 
|
| |
Replies: 10 / Views: 6,799 |
|