| Author |
 Replies: 20 / Views: 4,305 |
|
Pillar of the Community
 United States
594 Posts |
|
|
|
|
Pillar of the Community
United States
3058 Posts |
Looks like you purchased that from a friend of mine, beautiful coin!  I don't know what to say about the line above 'HALF'. |
|
Pillar of the Community
United States
8715 Posts |
Nice coin. I wouldn't return it.
|
|
Pillar of the Community
 United States
594 Posts |
Thanks 1899 and 2017 - I like it too.
|
|
Bedrock of the Community
United States
12477 Posts |
That's odd. I'm not sure what to make of it just yet.
In Memory of Crazyb0 12-26-1951 to 7-27-2020
In Memory of Tootallious 3-31-1964 to 4-15-2020
In Memory of T-BOP 10-12-1949 to 1-19-2024
|
|
Pillar of the Community
Canada
4911 Posts |
return it...that is the line above the word, like under "CENT" but the metal has been displaced somehow after the coin was made. not an error and not IMO a straight grade coin..return it while you can..
Feel free to call me Will.
|
|
Pillar of the Community
7234 Posts |
OK, had to remember there was not a line above the Half Cent - just below it, whatever it is, but does look like metal was moved from a hit to it. Seems like the dot in the middle is missing too. Edited by Mark1959
04/25/2018 10:53 pm
|
|
Bedrock of the Community
United States
12057 Posts |
Struck through.
Member ANA - EAC - TNA - SSDC - CCT #890 "Most of the things worth doing in the world had been declared impossible before they were done." -- Louis D. Brandeis |
|
Pillar of the Community
United States
594 Posts |
Thanks Paralyse - that makes he most sense to me ..... are there any 'collectors' of those ?
|
|
Bedrock of the Community
United States
12477 Posts |
If it was struck through debris, it looks as if the debris is retained and the right-hand portion of it shifted south from some contact. Quote:
that is the line above the word, like under "CENT" This coin doesn't have a line above. It does heavily resemble the line below CENT, though, so could it be struck through a dropped grease fill/plug of the lower line? In Memory of Crazyb0 12-26-1951 to 7-27-2020
In Memory of Tootallious 3-31-1964 to 4-15-2020
In Memory of T-BOP 10-12-1949 to 1-19-2024
Edited by spru
04/26/2018 01:16 am
|
|
Pillar of the Community
United States
2311 Posts |
The coin looks fine to me. I'm not sure why some people are calling for it to be returned.
|
|
Moderator
 United States
188374 Posts |
Quote:
The coin looks fine to me. I'm not sure why some people are calling for it to be returned. I agree. Whether struck through or damage, the line is not distracting enough for me to dislike the coin. |
|
Pillar of the Community
United States
594 Posts |
Isn't a struck through mark indented into the coin? This is raised. Is that possible?
|
|
Pillar of the Community
United States
6384 Posts |
I presume the thinking is that a mass of debris (maybe metal dust generated from the striking process?) accumulated in the recessed line on the reverse die. When the planchette for this coin was struck the accumulated mass stuck to the planchette, creating the raised line on the finished coin. This created a struck-through error in which the foreign material is retained on the coin.
As an error the coin is interesting and desirable. If it were damaged PCGS should have flagged it and it would not be something I would desire for my collection.
|
|
Pillar of the Community
United States
8715 Posts |
Yeah, definitely a strike through.
|
|
Bedrock of the Community
United States
12057 Posts |
It's scarce but not unheard of. Northern Nevada Coin had a PCGS-slabbed Morgan dollar at a recent show which had an entire 2" length of some sort of wire that fell into the dies and was struck into the coin, where the middle section was still on the coin but the ends had come loose and raised up, leaving a little valley across the coin's fields where the wire was. Member ANA - EAC - TNA - SSDC - CCT #890 "Most of the things worth doing in the world had been declared impossible before they were done." -- Louis D. Brandeis |
| |
Replies: 20 / Views: 4,305 |
Posted 04/25/2018 10:14 pm
