2000 P Lincoln Memorial Cent / LMC .. Lamination Problem? Or Needing Water

To participate in the forum you must log in or register.

Author	Replies: 7 / Views: 966
killians76 Pillar of the Community United States 986 Posts	Posted 05/10/2018 10:57 am Looks like it's been through a drought. Flat background through the letters are cracked, major. Anyway what causes this? Report this Post to the Staff

Crazyb0 Rest in Peace 10197 Posts	Posted 05/10/2018 12:35 pm Anomalies like this in metal processing occur all the time. Too many variables may cause a metal "flaw". I would venture to say NOT a lamination problem because of the manner of production, a plated/core product(different than cladded). Laminations are produced from a miss-matched alloy mix, in modern times, with plating materials, that is almost an impossibility. That leaves two other possibilities,post or pre mint processing. I could be circulation damage, coin could have been twisted slightly causing a crack in the plating at that weaker spot. Or it could be the result of a stretched metal weakness during strike. The latter is referred to as "split plating" when it happens at the device edges. Either way, a weakened metal "split" at that point. Report this Post to the Staff
Errers and Varietys Bedrock of the Community United States 74813 Posts	Posted 05/10/2018 1:02 pm Good answer Crazyb0! Errers and Varietys. Report this Post to the Staff
SilverDollar2017 Pillar of the Community United States 8715 Posts	Posted 05/10/2018 1:07 pm Report this Post to the Staff
da Swampster Valued Member United States 420 Posts	Posted 05/10/2018 1:16 pm Since not stated, my first impression was the coin is pre '82 -- so split plating never even crossed my mind.. I did, however, lend just as much credence to a working hub issue as coin twist / weak spots cracking.. What it actually is though..? Waiting... EDIT: Upon re-examination, I have to go with a pre 1982 coin that at some point post-strike fell victim to metal fatigue cracking due to either incomplete mixing of or improperly portioned penny batter.. Swamp Edited by da Swampster 05/10/2018 1:44 pm Report this Post to the Staff
HoboNickelCarver Pillar of the Community United States 717 Posts	Posted 05/10/2018 1:29 pm Interesting discussion. Thanks for sharing! Report this Post to the Staff
coop Bedrock of the Community United States 62064 Posts	Posted 05/10/2018 3:09 pm To me it looks like a struck through thread issue. You just can't see it as strong on the field areas. Report this Post to the Staff
da Swampster Valued Member United States 420 Posts	Posted 05/10/2018 9:15 pm Thanks Coop.. Upon being stated it now appears obvious.. Swamp Report this Post to the Staff
	Replies: 7 / Views: 966

To participate in the forum you must log in or register.

All Forums Category: US Coins and Currency Forums Forum: US Modern Variety and Error Coins

Silver Gold Bull US is the United States leading bullion dealer. We deliver gold coins, gold bars, silver coins, silver bars and precious metals to your door. Order today!

The First Dollar, your premier source for bullion and rare coins. See our bullion list on the site and the coin inventory on ebay.

View Last 100 New Topics

View Last 100 Active Topics

Disclaimer: While a tremendous amount of effort goes into ensuring the accuracy of the information contained in this site, Coin Community assumes no liability for errors. Copyright 2005 - 2026 Coin Community Family- all rights reserved worldwide. Use of any images or content on this website without prior written permission of Coin Community or the original lender is strictly prohibited.
Contact Us | Advertise Here | Privacy Policy / Terms of Use

Coin Community Forum

It took 0.3 seconds to rattle this change.

2000 P LMC.. Lamination Problem? Or Needing Water