I wanted to see what you guys thought, I see a possible DDR on the ONE CENT and on the UN of United. But I'm still learning the difference between double dies and DDD. Let me know what you guys think. Thanks :)
Note the ONE is reduced. So what is that? It is from die polishing.
If the devices were enlarged to normal size, it would probably be a Struck Through Grease error. If the devices are enlarged more than normal, it might be a doubled die. But if the devices are showing flat shelf like flattening, and the devices are normal sized except for the affected areas, then it would probably be Machine Doubling. Note the doubled die on the bottom. Note how the devices are enlarged? Also not how the devices are reduced from normal size on the machine doubled example?
Disclaimer: While a tremendous amount of effort goes into ensuring the accuracy of the information contained in this site, Coin Community assumes no liability for errors. Copyright 2005 - 2026 Coin Community Family- all rights reserved worldwide. Use of any images or content on this website without prior written permission of Coin Community or the original lender is strictly prohibited. Contact Us | Advertise Here | Privacy Policy / Terms of Use