I dont see a band saw doing that. The blade is bigger than that whole cut. I do agree its PMD. No telling what really made that cut. I worked in a fab shop for many years. This could be done with a CMC laser or a mill. Can see where each corner is rounded off to be able to turn and make the next cut. If you could cut that with a band saw John, you have some skill!
Disclaimer: While a tremendous amount of effort goes into ensuring the accuracy of the information contained in this site, Coin Community assumes no liability for errors. Copyright 2005 - 2026 Coin Community Family- all rights reserved worldwide. Use of any images or content on this website without prior written permission of Coin Community or the original lender is strictly prohibited. Contact Us | Advertise Here | Privacy Policy / Terms of Use