Not doubling as the other columns would be affected the same. More of die polishing issue that altered the bays on the die. (The bays are level with the fields on the die. Thus if the polisher falls into the coin for the column, the outside of the dies fields could be reduced by being altered, and the coins would show a raised area, just like you are seeing on your coin. So it is not a doubled die.
Disclaimer: While a tremendous amount of effort goes into ensuring the accuracy of the information contained in this site, Coin Community assumes no liability for errors. Copyright 2005 - 2026 Coin Community Family- all rights reserved worldwide. Use of any images or content on this website without prior written permission of Coin Community or the original lender is strictly prohibited. Contact Us | Advertise Here | Privacy Policy / Terms of Use