Correct. MD alters the devices by altering the size of the devices. Mostly pushing in a direction that remove the contour of the devices and alters the shape. Also this area of the design is not the target area for a doubled die. The centers of the design is the place to look for this. (check the web sites on these dies to see what to look for on these designs. Not all designs will have a doubled die on the DDR's) Note on this one, the area in question doesn't have anything going on? uploaded/coop/Q2021_TARGET_AREAS_FOR_DDR_USM_AAA.jpg[/img[ So there will probably be no DDR's when this happens.
Disclaimer: While a tremendous amount of effort goes into ensuring the accuracy of the information contained in this site, Coin Community assumes no liability for errors. Copyright 2005 - 2026 Coin Community Family- all rights reserved worldwide. Use of any images or content on this website without prior written permission of Coin Community or the original lender is strictly prohibited. Contact Us | Advertise Here | Privacy Policy / Terms of Use