Would these be considered Rim ( Gutter) Cud? There's only one example on Cuds 2000-07 but can't tell from their closeup. It's probably not but I had to ask. Thanks for comments.
It could be a sharp edge on the die forming, that split the plating or is the distortion on the die outer edge of the Ridge Ring. Note it affects the area where the Ridge Ring is the worst.
I saw a Rim Gutter Cud on Cudsoncoins #2000-07. Per Mike Diamond. I couldn't tell from looking at their closeup what they meant. Like everyone else I didn't know that there was/is a Gutter Cud. To me their picture of the full obverse sorta looks like maybe a rim Cud? or Rim Fin?
I thing the name come or they named like this because the inside of the rim is lower with almost nice rim round border. the Cuds are very small but presents on the rim.
Disclaimer: While a tremendous amount of effort goes into ensuring the accuracy of the information contained in this site, Coin Community assumes no liability for errors. Copyright 2005 - 2026 Coin Community Family- all rights reserved worldwide. Use of any images or content on this website without prior written permission of Coin Community or the original lender is strictly prohibited. Contact Us | Advertise Here | Privacy Policy / Terms of Use