. I do not think it is a doubled/tripled die. Looks like a worn die issue with maybe MD=machine doubling? Let's wait for a pro or two to chime in though. John1
On the affected areas, they are reduced by removing the contour off of the devices. 1. When you see this on both sides of the coin, a red flag always goes up. 2. True the affected areas are horizontal, but note how they are affected. They are reduced not enlarged. Note on these images the devices that are affected are showing spread on those devices. 3. You are looking in the right areas, but in this case, the devices were reduced in size because of a high bounce after the strike removing the contour on those areas. On a DDR you would need to see the spread.
Disclaimer: While a tremendous amount of effort goes into ensuring the accuracy of the information contained in this site, Coin Community assumes no liability for errors. Copyright 2005 - 2026 Coin Community Family- all rights reserved worldwide. Use of any images or content on this website without prior written permission of Coin Community or the original lender is strictly prohibited. Contact Us | Advertise Here | Privacy Policy / Terms of Use