Coin Community Family of Web Sites Join Thousands of Coin, Bullion, & Money Collectors
Coin, Banknote and Medal Collectors's Online Mall Royal Canadian Mint products, Canadian, Polish, American, and world coins and banknotes. Specializing in Modern Numismatics Join Thousands of Coin, Bullion, & Money Collectors 300,000 items to help build your collection! Shop for APMEX Bullion on eBay!Vancouvers #1 Coin and Paper Money Dealer








Username:
Password:
Save Password
Forgot your Password?


This page may contain links that result in small commissions to keep this free site up and running.

Welcome Guest! Registering and/or logging in will remove the anchor (bottom) ads. It's Free!

Best Way To Store

To participate in the forum you must log in or register.
Author Previous TopicReplies: 16 / Views: 2,050Next Topic
Page: of 2
Valued Member
Cole317's Avatar
United States
248 Posts
 Posted 03/31/2009  7:28 pm Show Profile   Bookmark this topic Add Cole317 to your friends list Get a Link to this Message Number of Subscribers
Hey guys, my goal is to put together a real nice set of Lincoln's; VF-XF for pre-40ish and BU for the rest, and including some proofs and major errors. I've just made the mistake of ordering a Dansco 8100 Album to do this, and now I know that's not going to work. So... I guess I'm headed towards a nice 3-ring binder with the 2x2 insert pages. Will any airtight 2x2 holders fit into these? I have no experience with this type of thing, so my question is, what should my set up be. This is what I'm thinking of right now-
http://www.valleycoin.com/product_i...cts_id=14493
http://www.wizardcoinsupply.com/pro...er-1-14.html
http://www.wizardcoinsupply.com/pro...-pocket.html
ANY HELP IS GREATLY APPRECIATED!!
Bedrock of the Community
BadThad's Avatar
United States
19935 Posts
 Posted 03/31/2009  8:01 pm  Show Profile   Bookmark this reply Add BadThad to your friends list Get a Link to this Reply
I just staple my airtites into a quarter or half size 2x2, but those inserts are probably fine too....never used them. The Dansco binders are nice, but pretty thin for a Lincoln collection. I have 3" and 4" binders and they are bulging.
Lincoln Cent Lover!
VERDI-CARE™ INVENTOR
https://verdi.care/
Valued Member
Cole317's Avatar
United States
248 Posts
 Posted 03/31/2009  8:07 pm  Show Profile   Bookmark this reply Add Cole317 to your friends list Get a Link to this Reply
Yeah, I was looking at those hard plastic 2x2's cause I think It would make for a nice, clean, flat, uniform page. And your right, I think 1" is way to small now, I just need to find a NICE big one. I guess I'm going to just fill the dansco very slowly with my best finds from circulation and bargin bins, although some dates may be tough...... and with the binder, I can also get the "certified coin-size pages" also.. Yeah, I'm liking this Idea.
Edited by Cole317
03/31/2009 8:08 pm
Pillar of the Community
ceaton's Avatar
United States
1179 Posts
 Posted 03/31/2009  8:36 pm  Show Profile   Bookmark this reply Add ceaton to your friends list Get a Link to this Reply
I set myself up with Thad's method and its great. I use a 4" binder that is about to bulge too. I'm 33 coins short of a full set with proofs. Even though I stick to one coin per date/mintmark, having a blank album like this allows you to do whatever you please. I found it best to use Halve 2x2's with the airtites. I think the normal target type binder + cowens pages is going to be a bit cheaper then the Dansco route.
Valued Member
Cole317's Avatar
United States
248 Posts
 Posted 03/31/2009  8:41 pm  Show Profile   Bookmark this reply Add Cole317 to your friends list Get a Link to this Reply
Thanks for these tips guys, What about those hard plastic airtight 2X2 instead of the round airtites inside a cardboard 2x2?
could someone post a pic of this set-up?
-thanks
Moderator
Learn More...
jbuck's Avatar
United States
187702 Posts
 Posted 04/01/2009  10:30 am  Show Profile   Bookmark this reply Add jbuck to your friends list Get a Link to this Reply
You might find it difficult to insert the hard plastic 2x2 holders into the page pockets. By using an Airtite inside a cardboard 2x2, you have a tapered package that will slide into the pockets very easily.

As for the Dansco, make that your "number two" album for circulation finds or a place to put the cents you removed from the "number one" 2x2 album after upgrading!
Bedrock of the Community
United States
20753 Posts
 Posted 04/01/2009  3:10 pm  Show Profile   Bookmark this reply Add just carl to your friends list Get a Link to this Reply
It's up to you to do as you think best but for me it's basically Whitman Albums. I've presently have over 100 of them in Zip lock bags. I've been using Whitman Albums for as long as they have been made. I have never had a problem with coins tarnishing, toning, corroding or anything. I also keep many duplicates in 2x2's and in those Whitman type 2 row red cardboard boxes and many, many more in those plastic rolls. Since I've had some coins for over 60 years now and no problems I would assume my method is fairly save. Of course in a few humdred years they all may turn into a pile of rust and if so I'll let you know.
Pillar of the Community
nod2003's Avatar
United States
3294 Posts
 Posted 04/01/2009  3:14 pm  Show Profile   Bookmark this reply Add nod2003 to your friends list Get a Link to this Reply
What about those blue Whitman folders where you can only see the front? Are those bad to use (besides only seeing one side of the coin)?
Bedrock of the Community
United States
20753 Posts
 Posted 04/02/2009  10:19 am  Show Profile   Bookmark this reply Add just carl to your friends list Get a Link to this Reply

Quote:

What about those blue Whitman folders where you can only see the front? Are those bad to use (besides only seeing one side of the coin)?


AAHHHHHHHH. I've explained this many times. Those are really for kids. To start with the slots are made in a rather tapered method so the inside of the slot is the right size for the coin. The outside is smaller and that is why the coins must be PRESSED into the slots. If a newesh coin, it is usually pushed in with a thumb and even some use a soft HAMMER. Not to good for those coins you know.
The next thing is if you look at the rear of the slots, you would notice they are rather shinning. That is from the glue from the manufacturing process. Comes in handy if your coins are worn and fall out. You just spit on those shinny glue areas and your coins will now stick in place. Of course that too is not a highly recommended process for the future of the coins.
In other words, don't use those please.
Bedrock of the Community
United States
20753 Posts
 Posted 04/02/2009  10:30 am  Show Profile   Bookmark this reply Add just carl to your friends list Get a Link to this Reply
Way to late for this suggestion but here is what I do. I use the Whitman Classic Albums for all coins. Some of my Albums are rather on the do it yourself types. For example I have constantly added pages to Lincoln Cent Albums to make it from 09 to present with still slots for future. Now up to 10 pages in the Albums. Most Whitman Albums are over sized for additional pages. Many of my Mercury dime Albums contain two complete sets separated by a hard cardboard sheet that says #6 or whatever. Have made someintereting Albums using blank Album covers and blank pages. Example is a Liberty Head/Mercury/Roosevelt Dime Album but no proofs or error coins. A Liberty Head/Buffalo/Jefferson Nickel Album and again no error or proof coins. Then of course there is my all Proof Album with one blank page for each denomination.
If you use Whitman Albums covers, blank pages and those press on Gold letter/number sheets, you can make many different Albums of whatever you want.
Pillar of the Community
nod2003's Avatar
United States
3294 Posts
 Posted 04/02/2009  11:23 am  Show Profile   Bookmark this reply Add nod2003 to your friends list Get a Link to this Reply
carl,

Since I already have my circulated Franklin half blue folder filled, is it better to remove them and do something else to store the coins, or are they really only a problem for high grade coins?
Pillar of the Community
Penny Guy's Avatar
United States
531 Posts
 Posted 04/02/2009  4:25 pm  Show Profile   Bookmark this reply Add Penny Guy to your friends list Get a Link to this Reply
I'm using the Capital Plastics holders for BU Lincolns. They've been in those holders for a looooong time. Over 30 years not with no dedegration. Cost is up there now though.

I'm experimenting with a slab type holder for odds and ends. Made by a company called BCW. I don't like the BCW soft foam inserts so I use inserts from the Coin World slab holders. Cost isn't too bad, but I only have about 50 or so of them now. Time will tell it they protect the coin well.

Bedrock of the Community
United States
20753 Posts
 Posted 04/03/2009  3:02 pm  Show Profile   Bookmark this reply Add just carl to your friends list Get a Link to this Reply

Quote:

carl,

Since I already have my circulated Franklin half blue folder filled, is it better to remove them and do something else to store the coins, or are they really only a problem for high grade coins?


Yes it would pay to move them as soon as possible. As I mentioned the glue in the rear of the slots in not good for the coins. If your area is basically dry, no humidity, that glue is rather dormant. IF, where you live there is any humidity and/or where you store you coins there is suffiecient humidity, that glue becomes sticky and attaches to the coins. In many instances people post a photo of a coin with lines, marks, discolorations on the rear of a coin only. That is a teltail indication that the coin was in one of those folders.
That does come in handy for kids with really worn coins. So that they don't fall out, kids spit on the rear of the coin and put it back in that folder. Now the glue makes the coin stay.
Bedrock of the Community
United States
20753 Posts
 Posted 04/03/2009  3:07 pm  Show Profile   Bookmark this reply Add just carl to your friends list Get a Link to this Reply
Of course there is one sure method for the preservation of coins.
Best-Way-To-Store
I made this in 1959 and all coins look the same as they did back then.
Valued Member
Cole317's Avatar
United States
248 Posts
 Posted 04/03/2009  6:46 pm  Show Profile   Bookmark this reply Add Cole317 to your friends list Get a Link to this Reply
Ok thanks for all the advice guys, but now I have some more questions.
Is this http://www.valleycoin.com/product_i...cts_id=14493 just made to hold these? http://www.valleycoin.com/product_i...cts_id=16450 If not, can you show me which air tight holder it's made to fit?
And also, are these airtight? http://www.valleycoin.com/product_i...cts_id=22679
Lastly, can anyone show me a simple set up, that just has a airtight 2x2 to hold cents?
thanks for the help!
Edited by Cole317
04/03/2009 6:50 pm
Bedrock of the Community
BadThad's Avatar
United States
19935 Posts
 Posted 04/03/2009  8:13 pm  Show Profile   Bookmark this reply Add BadThad to your friends list Get a Link to this Reply
Never used those black airtite holder, but I like to write on the 2x2's so those are out for me. Those snap together holders are NOT air tight.
Lincoln Cent Lover!
VERDI-CARE™ INVENTOR
https://verdi.care/
  Previous TopicReplies: 16 / Views: 2,050Next Topic
Page: of 2

To participate in the forum you must log in or register.



    




Disclaimer: While a tremendous amount of effort goes into ensuring the accuracy of the information contained in this site, Coin Community assumes no liability for errors. Copyright 2005 - 2026 Coin Community Family- all rights reserved worldwide. Use of any images or content on this website without prior written permission of Coin Community or the original lender is strictly prohibited.
Contact Us  |  Advertise Here  |  Privacy Policy / Terms of Use

Coin Community Forum © 2005 - 2026 Coin Community Forums
It took 0.43 seconds to rattle this change. Forums