| Author |
Replies: 5,806 / Views: 498,114 |
|
|
|
Valued Member
United States
301 Posts |
'78 proof for $1.50 is a good deal! 
|
|
Pillar of the Community
United States
1302 Posts |
@Jim- Volume 1, I believe, will mostly be a catalog of varieties. Volume 2 dealt with theory and research- and Rob and the guys felt it necessary to release that first. Volume 1 should be more straightforward and have lots of great information and, they hope, will serve as a definitive guide to the collectible varieties in the series. GradeView is not Volume 3- but it is a companion piece to what the Ike Group has put out and in my opinion, if I do my job correctly, then GradeView will be us throwing the gauntlet down on how to discuss coin grading. We'll also share our take on CAC's grading criteria for the series, and much more. As I said before, we are in the photography stage and we have a ton of work to do. But it's exciting work and it's a pleasure to have the chance to work with the Ike Group guys on it.
That said, these projects aren't going to be released for a while- as there's much left to do. Hopefully by the end of the year we'll have at least one of them done.
Edited by cc99999 06/05/2012 11:55 pm
|
|
Moderator
 United States
190135 Posts |
Beautiful proof, mrbrklyn! 
|
|
Pillar of the Community
 United States
1126 Posts |
|
|
Pillar of the Community
United States
1302 Posts |
@stewart,
I've been seing quite a few of these striated planchets lately.
|
|
Pillar of the Community
 United States
1126 Posts |
Charles, I was curious are the striations from the rolling process ?
Terry
Edited by stewart 06/06/2012 1:29 pm
|
|
New Member
United States
43 Posts |
|
|
New Member
United States
43 Posts |
|
|
Pillar of the Community
 United States
1126 Posts |
mrbrklyn, Very nice looking 71-D Talon Head  Thank You for sharing that and the link to your Ike collection. I have always enjoyed looking through your web site cc99999, The reason I ask about when the striations may have been made is, I was trying to get a handle on when in the process this planchet may have been rejected from proof production. Denver Ike's made on San Francisco planchets are one of my favorite little side interests in the Eisenhower series. Terry
|
|
Pillar of the Community
United States
1302 Posts |
I have different theories about the cause of planchet striations- it has something to do with the scoring of the clad strip- although some point to impurities in the metal. Yet another theory is that it has something to do with improper polish.
Most of the heavily striated pieces I have seen were Denver Ikes, but I think you can see striations on many more Ikes when you look at the points of highest relief where the strike pressure is the lowest and the details of the coin haven't "come up".
|
|
Pillar of the Community
United States
1205 Posts |
Stewart..I found 3 PROOF Planchet IKES in my last 2 batches of 500 coins...I'm shooting them now...for those who don't know about these, in a nutshell, extra blanks, destined for proofs to be made in San Francisco were sent to Denver for business production(AFTER they got the treatment for proof's, ie, extra polishing, which removed chatter from perimeter...these are very interesting coins, and, stickout like a sore thumb when looking at 71-D's, due to their incredible luster and reflectivity..and, clean fields. The coins were made with very old and tired dies, and exhibit a lot of die flow lines usually mixed with polishing lines, both fine and coarse, (the early dies wore very fast, and needed constant polishing, to remove die cracks, clashes, and wear and tear, until the harder metal came out in early 1972, I believe), which adds EVEN more luster...on some, there is leftover CAMEO frosting, which leaves a "Halo" effect around IKE's head(and usually out about 1/4-1/2 inch), and, same around eagle reverse, making a mind-blowing coin. I believe CAC will label these, and, are quite fond of them from what I hear..problem is, all of mine are raw, and I don't plan on slabbing them just to get a sticker. If I recall, some were made VERY early in production(right after the RDV-OO6 coins), and, many of these were made in 1972,early in the year, to finish out the production? CG
|
|
Moderator
 United States
190135 Posts |
Very nice, mrbrklyn! 
|
|
Pillar of the Community
 United States
1126 Posts |
ilikeikes, Congrats on the finds and congrats on being able to run across bags of 500 to search through    The Denver Ike's struck on proof planchets are quite a challenge to find. But once you see one there is no mistaking it. Great explanation  Charles, Thank You for the response about the striations I know have a few pieces of information to chew on where as before I did not have a clue where they came from or what part of the process they developed in.
|
|
Valued Member
United States
72 Posts |
mrbrklyn:
Very nice '78 Proof, wish the one I just bought for $7 was as good.
cc99999:
I am looking forward to Vol 1. I am starting a grading set of PCGS slabs. Having limited collecting budget I'm looking for a 63 and perhaps a 62 having a 64 and 65.
stewart et al:
I have a striated planchet from a mint set. It's lined on only one side. Is that how they usually are?
- Jim
|
|
Pillar of the Community
United States
1205 Posts |
Seems I recall the Bicentennial coinage has the most consistent striation, of all years...it can add luster and make for a coin so bright, you need sunglasses to view, if even, and just the right depth.
|
| |
Replies: 5,806 / Views: 498,114 |