Could someone chime in on this coin? I'm wondering if the area on her cheek is a strike through or something similar. There is no metal plowed up around the trench. The low area is dull grey in color while the coin shows a moderate amount of lustre. The diagonal line from the bulb of the nose running NE is a hit. TIA nlp
Blowing up the last picture, at my best opinion, I'd have to say PMD. The top of the suggested area looks to be slightly ragged from having been scraped. Again, just my opinion Noel.
I thought PMD at first also but couldn't figure out how a gouge so deep would not leave a furrow and the surface texture of the gouge is a little off color but the same texture as the cheek. I would think it would have a shinny or flattened surface texture. I'll see if I can get a scope shot of the bottom of the gouge later this evening. nlp
Here we go. First pic is 20X the next four are 200X. Notice the wood grain type lines in the furrow at an oblique angle to the axis of the groove. How would PMD do that? nlp this pic is at the top of the groove and catches the gouge on the left of the primary
Disclaimer: While a tremendous amount of effort goes into ensuring the accuracy of the information contained in this site, Coin Community assumes no liability for errors. Copyright 2005 - 2026 Coin Community Family- all rights reserved worldwide. Use of any images or content on this website without prior written permission of Coin Community or the original lender is strictly prohibited. Contact Us | Advertise Here | Privacy Policy / Terms of Use