When you get better images, you might see what John Wexler says? Try to get the images to 3-5 devices per image. That way we can see what is going on, but not see too close. You are still having an issue with too much light on left side of the images. The light might need to be at a higher angle instead of too low. When it is too low you are actually talking an image of the glare from the bulb. (It is not bouncing off a device reflecting glare, but the light angle is getting into the image)With the light more downward, it bounces off the coin. I have mine set at 12:00 above the coin. Hope this helps.
Disclaimer: While a tremendous amount of effort goes into ensuring the accuracy of the information contained in this site, Coin Community assumes no liability for errors. Copyright 2005 - 2026 Coin Community Family- all rights reserved worldwide. Use of any images or content on this website without prior written permission of Coin Community or the original lender is strictly prohibited. Contact Us | Advertise Here | Privacy Policy / Terms of Use