| Author |
 Replies: 19 / Views: 1,337 |
Page 2 of 2
|
|
|
|
Bedrock of the Community
United States
10047 Posts |
|
|
Bedrock of the Community
Australia
21788 Posts |
It looks like some of the '0' has been dislodged, but not broken off.
Handle this coin with care.
|
|
Pillar of the Community
United States
6116 Posts |
I have seen this on so many cents from this year that I actually bought an MS example showing it. Unsure what is going on, and away from home right now, but looking to solve this later this fall as I don't think it's PMD but in no position right now to address it. |
|
Pillar of the Community
 United States
4618 Posts |
The line is parallel with the rim which makes me think it's damage from the coin mechanism of an old Gumball Machine or other vending device. The turn of the handle FORCES the coin through the slot/testing device and moves the product into the correct position at the same time. Sometimes the coin drags and other times the gumball is crushed. It's a fairly primitive mechanism. Occasionally you can tell when something is off because you have to apply heavy pressure to the handle.  ANA ID: 3203813 - CONECA ID: N-5637 Clean a coin that may be worth collecting? Please DON'T! When in doubt, leave it dirty!! 
|
|
New Member
 United States
5 Posts |
Thank you for replying. If this zero had been scraped off in a circular motion wouldn't there be scrapes before and after the zero? I tried scraping the zero off and on another penny tried to flatten the zero edge to no avail and damage was done to the surrounding area. I would love to here your findings when you are able. Thank you for the reply.
|
|
New Member
United States
5 Posts |
Good info my friends. Thank you.
|
|
Pillar of the Community
Canada
6244 Posts |
This coin was hit. You can see the remining from the original 0 SE of the strait line.@theCoins: the science and the mechanic science, you will be surprise to find out that the theory and practice do not fit in many cases.
Edited by silviosi
08/27/2022 02:21 am
|
|
New Member
United States
5 Posts |
Being struck makes sense. The line is straight not curved and the original part of the 0 is visible. To me it seems this couldn't be done as PMD because the end of the strike is exactly the same height as the base of the 1, 9, and 4. Seems like a precise strike (die)? To have a random strike damage just this small area so precisely with something so small seems unlikely. Hmmmm... |
|
Pillar of the Community
Canada
6244 Posts |
I do not know what is your knowledge of the Dies manufacture, but will put away this. Look at the two ends of the straight line is raise. Mean the material was dispatch and accumulate on this corners. Inside still be a little curve. Other thing: if was the die at least 10k coins was struck like this and was already know exist, but by the processes of making Dies is impossible to have this. Look better, the corners are raised.
Easy to do by any handyman this kind of damage. We see all the time.
Edited by silviosi
08/27/2022 03:44 am
|
|
Moderator
United States
56855 Posts |
 Looks like PSD from a coin counting-wrapping-vending machine. If it is on a MS coin, it might be from a counting machine at the mint? John1  |
|
Pillar of the Community
United States
4618 Posts |
thecoins said... Quote:
I tried scraping the zero off and on another penny tried to flatten the zero edge to no avail and damage was done to the surrounding area. If you think the coin is possibly valuable, you shouldn't do anything that could damage the surfaces. I don't think it's a problem in this case, but if the coin had been a rare error or variety, this could have been costly. ANA ID: 3203813 - CONECA ID: N-5637 Clean a coin that may be worth collecting? Please DON'T! When in doubt, leave it dirty!!
|
|
Moderator
United States
97793 Posts |
@yoko, I think the OP used another coin in an attempt to duplicate this. Not ushering the coin they originally posted.
However, that said, I think that this coin took a hit ling ago, moving the metal around a little and through the years of circulation any sign of the original impact had been rubbed off and smoothed over.
|
|
Bedrock of the Community
United States
62064 Posts |
|
|
New Member
United States
5 Posts |
Thank you so much for responding to this newby and yofor being so welcoming! I am so new to this and your input helps me understand much more about how Coins become damaged. Just to clarify...I did not damage this coin. The testing I did was on a couple other pennies that are worth a penny. :-) This coin is still perfectly intact. Sometimes when I type it is all I can do to formulate a sentence properly.  All of you are so much more knowledgeable than I and I really appreciate your input. Helps me to understand a little better. Looking forward to learning more.Thank you.   |
|
Moderator
United States
189603 Posts |
to the Community! |
|
Page 2 of 2
|
Replies: 19 / Views: 1,337 |
Page 2 of 2
|
First Page
Posted 08/27/2022 01:04 am
