| Author |
 Replies: 22 / Views: 1,609 |
Page 2 of 2
|
|
|
|
Pillar of the Community
United States
7083 Posts |
@ Marve65 Quote:
Well if you want to waste your time. Not to mention the time of the Coin Shop Owner....I'm I right....  |
|
Bedrock of the Community
 United States
10601 Posts |
Quote:
Not to mention the time of the Coin Shop Owner....I'm I right True - didn't think of the coin dealer  Edited by Marv65
10/06/2024 10:45 pm
|
|
Valued Member
 United States
399 Posts |
Another error of the 1986 Rosevelt dime; I found this online. Is there more out there of similar coins and mistakes?  Edited by Dough101
10/07/2024 08:45 am
|
|
Pillar of the Community
United States
5193 Posts |
Just PMD "post mint damage" , also your last reply is PMD . |
|
Pillar of the Community
 United States
1471 Posts |
Unfortunately, these coins are not "errors". Authentic error coins can often be confused with coins that have post-mint damage ( PMD). Such coins are damaged (gouged, scraped, etched, mutilated, flattened) after the final strike, (before or after leaving the mint) either accidentally or deliberately. If the damage occurs at the mint after the minting process, for example in subsequent automated handling, it is still considered post-mint damage. Corrosion, scratches, bending, dings, gouges, scrapes, etc... can, and often do, occur to coins in circulation and sometimes may be intentionally made to mimic mint-errors. |
|
Valued Member
United States
399 Posts |
Found this coin online.  |
|
Pillar of the Community
United States
1471 Posts |
Yes, but that is way different than the coins for which you have provide photos. The first coin you posted appears to have been faked by squeezing two coins together in a vise. The second coin you posted is just scraped up, damaged, moved metal. That coin that sold for $5,000 in 2022 does not show displaced, moved metal (damage), but rather one can clearly see the imprint of another coin. (Which, by the way, can also be faked, and would need to be certified by a TPG.) For more info on the latest image you posted ($5,000 sold in 2022), it was certified by a Third Party Grading company ( TPG), specifically NGC. The certified coin can be found on NGC's site: https://www.ngccoin.com/certlookup/1816099-001/66/Edited by igwt79
10/07/2024 12:00 pm
|
|
Valued Member
United States
399 Posts |
Maybe I will send this coin to PSCG to physically see this coin; they are honest people. Scammers do wrong planchette?
|
|
Pillar of the Community
United States
1471 Posts |
|
|
Pillar of the Community
United States
7516 Posts |
It is a Hammer job which it is considered damaged coin, the flattening on the reverse is the clue to realize how this was done.
|
|
Pillar of the Community
United States
1471 Posts |
Send it in to PCGS and post your results here, whether genuine error or not.
I wish you good luck.
|
|
Bedrock of the Community
United States
10601 Posts |
Quote:
Maybe I will send this coin to PSCG to physically see this coin; they are honest people. I think you should as it seems you don't believe any of the people on this forum! |
|
Pillar of the Community
United States
7516 Posts |
Quote:
Maybe I will send this coin to PSCG to physically see this coin; they are honest people. Ok, that's your prerogative, but just before you do that try this: get Two Dimes, put them on a flat surface ,put the reverse of one on top of the other with profile side up, get a hammer and go at it, then you can send that one to PCGS as well.  |
|
Pillar of the Community
United States
7174 Posts |
Dough, You have centuries of experience in these replies telling you it's damage. Every coin you came back with is damage also. Just because you see it on some other site [where they're in it for the money] doesn't make it true. Go ahead and send it in for your satisfaction. If it comes back as a real error, I will pay you double whatever it costs you to have it authenticated.
|
|
Valued Member
United States
399 Posts |
@chase007, that's good advice. I'll try some experimenting. I'll put two dimes together and smash them with a hammer. Lets see if they will mold each other. Since the metals are hard and dried. It is just my guess.
|
|
Page 2 of 2
|
Replies: 22 / Views: 1,609 |
Page 2 of 2
|
First Page
Posted 10/06/2024 10:37 pm
