Hello Folks, this Coin came from an OBW roll. There seems to be something coming out of the bottom of the D. I could not match it up with any of the known rpm's from VV. There were 5 or 6 other Coins with this same MM in the roll. Thanks for any help!
I think it may just be a die gouge? I find them pretty neat and I'm going to keep them. I made this post about half way through the roll after I came across 5 or 6 of them, I ended up getting about 12/14 of them by the time I got to the end of the roll. The roll did produce about 10 Coins with actual rpm's.
Probably a die scratch that was large at one time, not it is just hanging in there, protected by the mintmark. (Die scratches fade fast out in the open fields, but last a lot longer near a device. Even longer if they are inside of the a device.
Here is an example I found years ago and thought it was a RPM:
Note how much stronger the die scratch is on the center of the mintmark? Weaker at the top and still visible below the mintmark.