| Author |
 Replies: 17 / Views: 2,226 |
|
Pillar of the Community
United States
1572 Posts |
Edited by Sudz
09/24/2013 7:34 pm
|
|
|
|
Pillar of the Community
United States
2563 Posts |
I say either a die break or lamination. Let's see what the pros say!
|
|
Valued Member
United States
388 Posts |
I'm going with Lamination. Only the second Zinc one I've ever seen. Nice!
|
|
Pillar of the Community
United States
8516 Posts |
Split plating ?
Oregon coin geek.....*** GO BEAVS ! ! ! ***
|
|
Pillar of the Community
United States
2624 Posts |
Could I see the reverse and the edge of the coin ,focus on the area where the "split" starts and ends.
|
|
Pillar of the Community
 United States
1572 Posts |
Edited by Sudz
09/24/2013 9:17 pm
|
|
Pillar of the Community
United States
2624 Posts |
I was thinking "struck through split plating" but I will say it's just a split in the plating.
|
|
Pillar of the Community
United States
1572 Posts |
DrDon, I am not familiar with that error. I am guessing it is somewhat common and no big deal, then?
|
|
Bedrock of the Community
United States
62064 Posts |
George: Is the area above LIB that show peeling; is it copper under that area? Or is zinc showing in that area? If it is copper, I'm thinking a struck though debris. If it is zinc (which I don't think it is) It may be something else. What I'm not sure, but I thinking it a plated planchet with a piece of copper plating struck onto your coin.
|
|
Pillar of the Community
United States
1699 Posts |
I couldn't tell you what it is for certain. Interesting coin. To me it seems to be similar to a deflated gas bubble, except on a larger scale.
|
|
Pillar of the Community
872 Posts |
If you look at the "R" in LIBERTY, it looks like the planchet had the issue before it was struck. Looks like it originated on the planchet and the Mint gave its "stamp of approval".
|
|
Pillar of the Community
United States
2651 Posts |
I'm pretty sure I have a Zincoln Lamination. I will take pictures of it and post it on a separate thread later.
|
|
Pillar of the Community
United States
2624 Posts |
Quote:
DrDon, I am not familiar with that error Quote:
a plated planchet with a piece of copper plating struck onto your coin. coop: Thanks for answering for me. |
|
Pillar of the Community
United States
1572 Posts |
Thanks everybody for your help! Here is a pic of the inside of the separated area. As DrDon and Coop surmised, it seems to be copper underneath indicating that it is a strike through copper plating error. You can see verdigris forming down inside. I wonder if there is a market for this kind of error? Any ideas?  |
|
Pillar of the Community
United States
853 Posts |
Cool one, Sudz! It has character for sure.
|
|
Valued Member
Canada
286 Posts |
Nice find..looks like a planchet flaw...nice one
|
| |
Replies: 17 / Views: 2,226 |
Posted 09/24/2013 7:53 pm
