These were all scanned at 7200 DPI on an HP-4890, saved as BMPs, shrunk to 360 pixels square, grouped together and saved as JPGs at just under the 300KB limit. I have mostly switched to taking photos now, both because I now have a good macro setup and because 7200 DPI scans of the 5oz ATBs saved as BMPs would each be about 1.4GB and that is a lot of data to send over a USB2 link. Scans are good but you pretty much get what you get. There is a lot more freedom with photos, especially in lighting and bringing up very small details. at 7200 DPI each pixel is about 3.5um and I can get down to less than 1um per pixel with my camera setup.