Reverse is showing Machine Doubling. Note all areas you are looking at is on the edges of devices. No spread that we would see on a doubled die. All affected areas are flattened. Reducing the devices. A doubled die had the devices enlarged. These events happen to your coin after the strike from a normal die. Note the contour on each of these areas on the reverse is gone and all show the same reflective color because the devices are flattened. Normal coin with MD on the devices on the reverse. Bounced out of the roll, things happen randomly. If you had a doubled die, you would know it. Note why you look in the center of the devices to see the spread. (and not on the outside edges of devices where Machine Doubling happens?)
Disclaimer: While a tremendous amount of effort goes into ensuring the accuracy of the information contained in this site, Coin Community assumes no liability for errors. Copyright 2005 - 2026 Coin Community Family- all rights reserved worldwide. Use of any images or content on this website without prior written permission of Coin Community or the original lender is strictly prohibited. Contact Us | Advertise Here | Privacy Policy / Terms of Use