I'm thinking there was a struck through debris issue on the '6'. The debris shifted a bit. The Missing VDB is from a die polishing that removed the raised devices on the die. (VDB is raised on the die, incuse normally on the coins) Just like the ATB Quarters, if the die is polished a lot, the incuse devices on the coins suffer with the reduction of the raised devices on the die.
Disclaimer: While a tremendous amount of effort goes into ensuring the accuracy of the information contained in this site, Coin Community assumes no liability for errors. Copyright 2005 - 2026 Coin Community Family- all rights reserved worldwide. Use of any images or content on this website without prior written permission of Coin Community or the original lender is strictly prohibited. Contact Us | Advertise Here | Privacy Policy / Terms of Use