| Author |
 Replies: 26 / Views: 8,928 |
|
|
|
Pillar of the Community
United States
3237 Posts |
|
|
Pillar of the Community
United States
791 Posts |
Any updates on whether this coin might be the real deal?
|
|
Bedrock of the Community
United States
62064 Posts |
All that we need is an image of the edge of the coin in question with a cent on one side and a nickel on the other so that we see all three at once in an image. That would be proof enough.  Something like this, but have all three, where you can see the edge sizes and the view the face of the coins. That would solve the whole issue. |
|
Bedrock of the Community
United States
17884 Posts |
Quote:
All that we need is an image of the edge of the coin in question with a cent on one side and a nickel on the other so that we see all three at once in an image. That would be proof enough. That would depend on what portion of the edge he shows. If this is a nickel on cent planchet, it was close to one side of the coining chamber and as it spread in that direction it met the collar and formed up the rims. In that are it could very well be the same thickness as a regular nickel. |
|
Valued Member
 United States
220 Posts |
All, FYI, I brought a few of my coins to a local dealer, including this one. I asked if it was a genuine planchet error and what grade he thought it was. He measured and weighed it and, without answering the questions, offered me $35 for it. I declined. He had a pretty good poker face, but I could see was interested. He then offered $45. I again declined and left. I had a friend with some experience look at too and he thought it was genuine and estimated its grade between AU 50 to MS 62. I found this recent sale on ebay ( https://www.ebay.com/itm/PCGS-5c-19...47675.l2557) and IMHO, it looks very similar in quality/grade. Best, Bill |
|
Pillar of the Community
United States
4846 Posts |
I still maintain my opinion that it's a genuine cent planchet on nickel dies, but it should really be sent in to a TPG if you wanted to sell it. |
|
Bedrock of the Community
United States
62064 Posts |
The reason the strike is weak is because the thickness of the metal was not normal because of being a cent planchet.
|
|
Valued Member
United States
220 Posts |
All,
I brought a few coins to a local dealer, including this one. He weighed and measured it and, despite his "poker face", I could see he was interested. He offered me $35 for it, which I declined. He said he could go to $40. I told him I'd think about it. Can someone please estimate its Grade?
Thanks.
Bill
|
|
Pillar of the Community
United States
3237 Posts |
Definitely worth a lot more than $45 if genuine. Don't sell it to such an unscrupulous dealer.
|
|
Pillar of the Community
United States
3281 Posts |
Please DO NOT sell it for $45 as Sam said. If it's genuine it's worth quite a bit.
|
|
Pillar of the Community
United States
2738 Posts |
All the evidence indicates that this nickel was struck on a cent blank (most off-metal errors involve blanks, rather than planchets).
Error coin writer and researcher.
|
| |
Replies: 26 / Views: 8,928 |
First Page
Posted 07/25/2020 7:06 pm
