If you can look under an edge of the raised plating and see copper plating, then it is a struck through debris issue. But you see gray is is a peel of the plating from a possible cut/split on the plating. But I'm leaning more to a struck through debris/plating foil issue from that I can see. (Zinc cents don't laminate)
Disclaimer: While a tremendous amount of effort goes into ensuring the accuracy of the information contained in this site, Coin Community assumes no liability for errors. Copyright 2005 - 2026 Coin Community Family- all rights reserved worldwide. Use of any images or content on this website without prior written permission of Coin Community or the original lender is strictly prohibited. Contact Us | Advertise Here | Privacy Policy / Terms of Use