The first thing that you have to do is get your feet on the ground and understand what "doublings" are all about and how they happen. You can only do this by individual study, not necessarily asking questions on coin sites. There are a great many articles, studies and books written about doublings. What you have to remember is that ANY manufacturing process, regardless what the machine or process is being used for, will turn out things that are NOT PERFECT! That is why there are tolerances and the understanding that there will always be anomalies. I would suggest that you start with Wexler's studies/papers, but there are a great many other authors. Start with this and then read all of the links along the left side of the page. Here is a start:
http://doubleddie.com/58222.htmlYou should get a 5 to 10X loupe to examine your coins. If you start using more than that, the things that you find are essentially worthless. Most should be seen by just a good set of eyes. Probably, but I could be wrong, about 90% of errors that you find add no value at all to a coin. Many actually detract or subtract from the value. The only thing that is going to help you is to study study study and insure the accuracy of the material that you are using. There's lots of bad scoobie floating around on the internet. And don't believe everything that you see on CoinsandCanada. There's lots of BAD info on there, since much of it is just information that sometimes unlearned readers submit and then placed on the site.
Edited by okiecoiner
07/10/2021 4:22 pm