Without pictures it is hard for someone to help you. It could anyone of numerous things Post a clear photo of both sides of the coin and someone will be able to determine what you have.
If the letters are smaller, then it is probably an over polished die issue: If the devices are normal size, check to see if there were damaged on the coin. Sometimes a Struck Through Grease issue can enter in to block some devices. This makes them larger as the tapered areas are the point that fills first, and just the bases appear that are wider then the tops of the devices. But they should all be normal because the design is passed down the line through the chain of command:
Disclaimer: While a tremendous amount of effort goes into ensuring the accuracy of the information contained in this site, Coin Community assumes no liability for errors. Copyright 2005 - 2026 Coin Community Family- all rights reserved worldwide. Use of any images or content on this website without prior written permission of Coin Community or the original lender is strictly prohibited. Contact Us | Advertise Here | Privacy Policy / Terms of Use