Looks like damage to the coin on the rim and the devices sizes are telling me the die was over polishing making the devices smaller in size. I see not extra 'D' from the images provided. On a RPM you will see evidence to two or more punches on the mintmark: Note the two punches on the die? Note also that devices are enlarged in size? In order for this to be a RPM, it need to show separate punches on the mintmark area. Machine Doubling and coin damage does not make it a RPM. Even enlarging without showing multiple punches doesn't make it a RPM: The punches on this die don't show multiple punches, thus the enlarging does not make it a RPM.
Disclaimer: While a tremendous amount of effort goes into ensuring the accuracy of the information contained in this site, Coin Community assumes no liability for errors. Copyright 2005 - 2026 Coin Community Family- all rights reserved worldwide. Use of any images or content on this website without prior written permission of Coin Community or the original lender is strictly prohibited. Contact Us | Advertise Here | Privacy Policy / Terms of Use