| Author |
Replies: 89 / Views: 30,430 |
|
New Member
United States
23 Posts |
I recently acquired an Wheat penny from 1941 it is in superb shape for a coin so old.The odd thing is it is not copper or magnetic at all.It is lighter and thinner then a reg 1941 copper Wheat penny.It has odd sort of ring that is barely visible but the letter "L" in Liberty seems to be a bit close to the edge as well as "we trust" same on the back wheat side of the penny.I need some good coin advice on what I am actually looking at here.All advice welcome Thank you! 
|
|
|
|
Pillar of the Community
United States
2077 Posts |
Occasionally coins are struck on the wrong planchet. Do you have an accurate scale? See if it weighs the same as a dime.
|
|
New Member
 United States
23 Posts |
No I do not have a scale that accurate
|
|
New Member
 United States
23 Posts |
I am kind of curious if coins such as this bring any value..I was given a bag of probably 700 old coins ..500 of them wheat pennies..but this one stands out
|
|
Pillar of the Community
United States
1620 Posts |
Try and get a few better pics and the reverse of the coin
|
|
Valued Member
United States
349 Posts |
The L in Liberty is usually very close to the rim on these coins, so that looks normal. Need a better picture like daniels said. See if you can borrow a scale from someone to weigh it.
|
|
Pillar of the Community
Mexico
1304 Posts |
Sorry to throw my opinion into the fray, but I think it is a normal penny that was plated a long time ago. If it were a dime planchet, I don't think the rim would be raised and have a normal appearance like this coin has. (Examples of wrong planchets (052) Not Allowed - Auto-Removed .com/wrongplanchetminterror.html) Might want to check out the PCGS site on silver dimes: http://www.pcgs.com/Articles/Detail/1285
|
|
Bedrock of the Community
United States
20753 Posts |
I suspect this is one of the many that kids make in Chem Labs in school all the time. Coins are plated, dipped in things, acid melted, etc all the time.
|
|
Pillar of the Community
United Kingdom
2624 Posts |
Maybe that circle below the L in liberty is where the crocodile clip was attached when it was plated...
It seems the most likely explaination, but I would love to hear it turns out to be something rare...
|
|
New Member
 United States
23 Posts |
Ok I took this coin to 4 different places..2 jewelers and 2 coin collectors in the small town I live in.The nearest place to get this professionally cert and slabbed is about 2 hours away.The 4 I spoke to all say Silver..The oldest jeweler even made the comment that if it was plated it was the best job he has ever seen.It even has a ding at some point he saw under a scope and said that was even silver under.I am really excited and even if it turns out to be fake its been fun
|
|
Pillar of the Community
United States
3453 Posts |
Is there any way you can get a clearer picture of the front and back? I think you might be additional opinions here if you can post those.
|
|
New Member
 United States
23 Posts |
Yes I will try to take better pictures of it.I do not know the exact years kids began using them to plate in science classes but this one has not been touched for around 50+ years
|
|
New Member
 United States
23 Posts |
how easy is it scratch the plating off..it my moment of stupidity I tried that too
|
|
Bedrock of the Community
United States
12437 Posts |
Quote: Ok I took this coin to 4 different places..2 jewelers and 2 coin collectors in the small town I live in...The 4 I spoke to all say Silver And how did they determine that? tissue test? Weight? Specific Gravity? XRF Spectroscopy? All of these physical tests are important for authentication, just "looking" at a coin is the most unreliable method. The appearance of a ding under a microscope is largely irrelevant since the ding could have been present before the coin was plated. Quote: this one has not been touched for around 50+ years Unless you have personally owned this coin for those 50+ years, I would not trust the accuracy of that statement.
|
|
New Member
 United States
23 Posts |
Meeting a another local jeweler in about 2 hours to get some actual testing done on it.So we shall see
|
|
Pillar of the Community
United States
3453 Posts |
I will be honest - I would be surprised this if this is silver. HOWEVER, on the off chance it is, please do not do anything else that would scratch, damage or put a chemical on the surface. It if is silver, you stand the chance of decreasing the numismatic value. Thus please be careful at the jewelers. I strongly suggest you get more accurate pictures to post here plus a weight on it. I know you are new to the forum but I believe there are thousands of years of expertise here that can give their opinion and back it up with facts. And finally, if you are still not satisfied, then a trip to ANACS or another reputable TPG would put the issue to bed.
|
| |
Replies: 89 / Views: 30,430 |