| Author |
Replies: 51 / Views: 10,974 |
|
Valued Member
Canada
54 Posts |
Edited by kijiji2012 01/07/2013 5:00 pm
|
|
|
|
Moderator
 Canada
10458 Posts |
The coin was partially pressed in a vice, the 'teeth' of the vise jaws have been imparted onto the coin (i.e., post mint damage).
Your coin is worth exactly two dollars.
"Discovery follows discovery, each both raising and answering questions, each ending a long search, and each providing the new instruments for a new search." -- J. Robert OppenheimerContent of this post is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported License. See: http://creativecommons.org/licenses...0/deed.en_USMy eBay store
|
|
Valued Member
 Canada
54 Posts |
any body else? I have looked at many of vice's and I dont think this was done that way, or I would not have wasted my time posting this thank you for looking, anything is posable , vice are teeth not little X's, but iam not sure
|
|
Pillar of the Community
 Canada
9865 Posts |
Not a mint error.Garage job as previously stated.
"Dipping" is not considered cleaning... -from PCGS website
|
|
Valued Member
 Canada
54 Posts |
ok then so we have nothing, thank you all
|
|
Pillar of the Community
United States
1002 Posts |
I think the vice explanation is probably correct. Same on both sides, like it was being held in the grip. See photo of quick google search for vice image. 
|
|
Valued Member
 Canada
54 Posts |
yes that looks like it but its the size, teeth on a vice are to bid and not square?
|
|
Pillar of the Community
Canada
2426 Posts |
|
|
Pillar of the Community
United States
1436 Posts |
 to the CCF. It's definitely PMD whether caused by actual vise jaws or something else... it was definitely squeezed between something
|
|
Moderator
 Canada
10458 Posts |
I don't think you will find anyone here to validate your ridiculous ebay listing. http://www.ebay.com/itm/221174853095What possible element of the collar die or obverse and reverse dies, or a blank planchet, could possibly impart that image on both sides of that coin? At least four very knowledgeable collectors of errors have all given you a perfectly reasonable answer that you cannot accept. Why not? Because you know how the collar die and ejection process works for two-dollar strikes more than the error collecting community? Hardly, because if you really knew errors, then you would know the definition of a 'mule' and how it applies to numismatics (cf., title of your thread). Yes, it has been one of those days at work... 
"Discovery follows discovery, each both raising and answering questions, each ending a long search, and each providing the new instruments for a new search." -- J. Robert OppenheimerContent of this post is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported License. See: http://creativecommons.org/licenses...0/deed.en_USMy eBay store
Edited by SPP-Ottawa 01/07/2013 4:22 pm
|
|
Pillar of the Community
Australia
7096 Posts |
kijiji2012 I have emailed you via your ebay listing, I have also reported it to ebay. You asked about this coin here and was given a definite assessment by eminent error experts. You chose to ignore the fact that this is simply a PMD issue and listed this for $500 on ebay. NO I didn't have a bad day at work, I am always this honest and tactless when it comes to ebay scammers
|
|
Valued Member
Canada
271 Posts |
No, you don't have 'nothing.' You have either an interesting conversation piece, or two dollars. However, you certainly don't have a mint error. It is completely impossible for an error like that to exist. The vice teeth shown in Canuck's picture fit the bill. You can get a smaller vice, I'm sure. Maybe even pliers?
|
|
Valued Member
Canada
271 Posts |
Why is it a private listing? Doesn't that stop most buyers from bidding on it? Not that it matters, it'll be gone soon anyway. Report this listing, IT'S A FAKE!
|
|
Valued Member
Canada
271 Posts |
WOW! He ended the listing! He ended the listing 3 to 4 minutes ago, because I viewed it before I posted. Sorry to post three times in a row, but these SCAMMERS get me so fired up... !
|
|
Valued Member
 Canada
54 Posts |
i did not ignore it and post it big month if you read the time frame, and it has been remove by me from ebay, due to all the answer on here I would not sell it if its not real, you are rude!
|
|
Pillar of the Community
United States
1002 Posts |
|
| |
Replies: 51 / Views: 10,974 |