| Author |
 Replies: 18 / Views: 4,507 |
|
New Member
United States
33 Posts |
Any help ia greatly appreciated. Ive looked high and low for another before coming to you guys. Thanks a lot!   *** Moved by Staff to a more appropriate forum. *** |
|
|
|
Bedrock of the Community
United States
62064 Posts |
Looks like the reverse is partly stained on the reverse from what I can see in the image.
|
|
Rest in Peace
United States
7075 Posts |
What part of the reverse are you looking at? Or are you asking about the discoloration?
|
|
Moderator
 United States
23522 Posts |
The discoloration appears to be the result of having been glued to something. I suspect acetone would probably dissolve it.
|
|
New Member
 United States
33 Posts |
Hi Buddy, I'mlooking at the center. It seems to have an extra layer or raised above the buffalo.
|
|
Moderator
United States
23522 Posts |
That's the glue I'm talking about.
|
|
Pillar of the Community
 United States
5828 Posts |
Its glue or tape, or something. I think, as stated, acetone might remove it. It's just PMD. |
|
New Member
United States
33 Posts |
On your Advice, I used the acetone. The discorloration has gone away, yet the irregular looking mounds through the mid section and lower collar, down the top front leg of the Buffalo look no differnt then before. Maybe I'mjust used to coming across more worn Buffalo nickels. To me, it looks like a mushroom laying on its side, Directly center. Ive cropped, so that it takes up the center, and this is what I'masking about. I know a couple of you have stated your opinion on glue or tape. Please have a second look. If you say glue again, then ok glue. Ive never meet a glue that stands up to an acetone bath. Thanks again, just wanna make sure before I throw it in the pile.  |
|
Rest in Peace
United States
7075 Posts |
Hmmm.
It's a puzzler. It almost looks like that chunk could be picked off.
|
|
Valued Member
United States
122 Posts |
Possible lamination area? On the VAM World site they always mention gently poking it with a stick (toothpick) |
|
New Member
United States
33 Posts |
Ok good, you see it then.I havent been in the coin buisness my whole life, dont claim to be an expert in the field. I have been familiar with glue a tape for some time now though, that theory just doesn't hold water...at all. I know you guys only have the picture, but I have the coin in front of me. So lets put glue and tape to bed.As far as picking it off goes, its not possible. Its the NICKEL!! IT WONT COME OFF,trust me I tried when it came out off the Acetone. So, picking it off...lets put that to bed too. Now where does that leave us? Has anyone seen this type of exta Mound? Lets just suppose for a moment, all general coin fooling with or other things like glue or tape aside, That it is the nickel. What could cause this to happen and how would it be classified? Ofcourse Id like to hear more about what esle you guys think it could be if not natural. However the coin is free of any debis by this point and the surface IS metal.
|
|
Pillar of the Community
United States
7623 Posts |
Possible metal lamination due to improper annealing. Nickels are notorious for having that problem.
|
|
New Member
United States
33 Posts |
Ill buy that maybe...Thank you. Ill investigate that avenue.
|
|
Moderator
United States
23522 Posts |
Yeah, the glue was only part of it. I see what we're talking about. On my phone, it looks like a lamination. Let me run upstairs and look on my PC. Edit: Yeah, I agree with myself.  |
|
New Member
United States
33 Posts |
|
|
Rest in Peace
United States
7075 Posts |
Quote:
Nickels are notorious for having that problem I don't have many Buffalo nickels so this is the first time I've seen it. So, I'm glad you posted it, DblClipped. I know it's a bit of work but we all learn from it. Thanks. |
| |
Replies: 18 / Views: 4,507 |
Posted 02/22/2015 2:32 pm
