Coin Community Family of Web Sites Join Thousands of Coin, Bullion, & Money Collectors
Join Thousands of Coin, Bullion, & Money Collectors Specializing in Modern Numismatics Royal Canadian Mint products, Canadian, Polish, American, and world coins and banknotes. 300,000 items to help build your collection! Coin, Banknote and Medal Collectors's Online Mall Vancouvers #1 Coin and Paper Money Dealer Shop for APMEX Bullion on eBay!








Username:
Password:
Save Password
Forgot your Password?


This page may contain links that result in small commissions to keep this free site up and running.

Welcome Guest! Registering and/or logging in will remove the anchor (bottom) ads. It's Free!

Question About A 2000 P Dime

To participate in the forum you must log in or register.
Author Previous TopicReplies: 3 / Views: 723Next Topic  
Valued Member

United States
484 Posts
 Posted 02/10/2021  12:22 pm Show Profile   Bookmark this topic Add My2cent to your friends list Get a Link to this Message Number of Subscribers
I was just wondering what caused the rim of the coin to look like this, all flattened.
It's a slightly larger circumference and thinner with very little reeding in one area. The Reeding could be just damage issues though.
These are all just reasons I am asking someone else.

Question-About-A-2000-P-Dime
Question-About-A-2000-P-Dime
Question-About-A-2000-P-Dime
Bedrock of the Community
coop's Avatar
United States
62064 Posts
 Posted 02/10/2021  1:01 pm  Show Profile   Bookmark this reply Add coop to your friends list Get a Link to this Reply
It looks like a slight MAD coin. (Mis-Aligned-Die) Usually the anvil die is stationary, and the hammer die is adjustable. So it they are not in alignment, it will alter one side of the coin.
Question-About-A-2000-P-Dime
Question-About-A-2000-P-Dime
When they are too far out of alignment, then the devices fall over the edge of the coin. Note the examples above. Note even the opposite side of the coin is affected. These are the collectables when you can see the devices falling over the edge of the coin and the weakness on the reverse. Without this, they are normal coins.
New Member
Ytee64's Avatar
United States
18 Posts
 Posted 02/10/2021  4:51 pm  Show Profile   Bookmark this reply Add Ytee64 to your friends list Get a Link to this Reply
Mr. Coop,
You are always so helpful, true to the handle "Bedrock of The Community"...I am related to some Indiana 'Coopers'. Anyway I also had a question about something struck in a Roosevelt dime and don't know what it could be. If you notice, it is that added wrinkle in his face, it didn't look like damage to me, it looks like it was struck in, please advise...thank you again.

Ytee64
Question-About-A-2000-P-Dime
New Member
Ytee64's Avatar
United States
18 Posts
 Posted 02/10/2021  5:19 pm  Show Profile   Bookmark this reply Add Ytee64 to your friends list Get a Link to this Reply
Also Coop, Here is a dime similar to the error you have pictured above. I saw one almost exactly like mine online for over 2000...is that the real possibility or wishful thinking by the seller?

Ytee64
Question-About-A-2000-P-Dime
Question-About-A-2000-P-Dime
  Previous TopicReplies: 3 / Views: 723Next Topic  

To participate in the forum you must log in or register.



    




Disclaimer: While a tremendous amount of effort goes into ensuring the accuracy of the information contained in this site, Coin Community assumes no liability for errors. Copyright 2005 - 2026 Coin Community Family- all rights reserved worldwide. Use of any images or content on this website without prior written permission of Coin Community or the original lender is strictly prohibited.
Contact Us  |  Advertise Here  |  Privacy Policy / Terms of Use

Coin Community Forum © 2005 - 2026 Coin Community Forums
It took 0.26 seconds to rattle this change. Forums