Different roll of 1964-D, different RPM. RPM-004 is surprisingly wide (north) for a virtually unknown RPM. I doubt it's on the must have list for many collectors, but nice when you find one.
Right and wrong. Wrong is calling that thin lamination flake by the 4 a die chip. Right is that there is a die chip/gouge, but it's right above the D on the curve of the 6. It's bigger than it looks in the lighting I used, but it is a die marker for the RPM.
No images of the die chip on the '4'. If it were on the die with as RPM, it would be visible on all die states. It's not, so it was not on the die from the start. Thus I'm calling this a die chip. Thanks fixed it.
Disclaimer: While a tremendous amount of effort goes into ensuring the accuracy of the information contained in this site, Coin Community assumes no liability for errors. Copyright 2005 - 2026 Coin Community Family- all rights reserved worldwide. Use of any images or content on this website without prior written permission of Coin Community or the original lender is strictly prohibited. Contact Us | Advertise Here | Privacy Policy / Terms of Use