| Author |
 Replies: 20 / Views: 2,068 |
|
Valued Member
United States
369 Posts |
I was told the lettering was too close to the edge   |
|
|
|
Bedrock of the Community
United States
73644 Posts |
I think that's normal.
Errers and Varietys.
|
|
Bedrock of the Community
United States
94367 Posts |
|
|
Valued Member
 United States
369 Posts |
|
|
Valued Member
United States
369 Posts |
|
|
Pillar of the Community
 United States
1460 Posts |
Maybe a slight MAD, but well cirulated. I agree with Errers and coinfrog.
|
|
Valued Member
United States
369 Posts |
So who do I believe my nickel looks like the one they're saying it's an error?
|
|
Pillar of the Community
United States
1460 Posts |
You believe who you want to believe.
I'm just offering my opinion. I'm no expert by any stretch of the imagination.
By the way who is "they" who told you this is an error?
|
|
Bedrock of the Community
United States
19113 Posts |
Not an error. The lettering--by design--is close to the rim to start with. Die Deterioration and circulation wear tends to 'merge' the lettering with the rim. In my several decades of searching of US coin rolls, I've dug through thousands and thousands of nickel rolls. I'd estimate that I've come across a few thousand nickels where lettering does merge with the rim. Too, even slight instances of misaligned die will blend the two features. Edited by ijn1944
09/08/2023 3:38 pm
|
|
Pillar of the Community
 United States
6506 Posts |
 Misaligned die |
|
Valued Member
United States
369 Posts |
Excuse my ignorance you know we're still learning and yet I have to put a puzzle together and in time I'll figure it out I do appreciate your patience. Then they ask you simple question what should I just be looking for is there like a list of coins that I can just see and just look for them certain coins or stop looking at every coin for imperfections? TV
|
|
Pillar of the Community
United States
3237 Posts |
Few things going on here. It's being caused by both circulation flattening, which is pressing the devices outwards towards the rim and also impacting the rim inwards towards the devices, and also Die Deterioration, which is causing the devices on the die itself to flow towards the rim. Also, minor misaligned die, causing it to be more pronounced around LIBERTY. None of these are errors, nor do they add any value to the coin. As for your question about what you should be looking for, the best way to learn in my experience is to read other posts on this forum and see which coins are deemed genuine errors and which are not by the experts here. Another good way is to read entries for common errors on error-ref.com Edited by SamCoin
09/08/2023 4:29 pm
|
|
Pillar of the Community
United States
1460 Posts |
I'm still learning also and this is a great place to learn. I don't stop looking. I look at each coin, but try to use what I learn here to make sense of what I'm looking at... If you find something you think is unusual or interesting, compare it with another coin of the same date and mint mark, then check the following post http://goccf.com/t/448257) for some very informative links, if you think you found something in the links and your research that points you towards a possible error or variety, post some images and try to explain what you see and where you found your information. That will help others to help you learn. I haven't posted anything new in a while because I have little free time lately and spend it sorting my coins by date and mint mark for future comparison and research. Good luck on your journey. Most of all, enjoy, have fun! Thanks for sharing. Edited by igwt79
09/08/2023 4:38 pm
|
|
Pillar of the Community
United States
3207 Posts |
since die misalignment is not intentional, I consider the coins they produce to be errors, but very minor ones, and too commonly seen to carry a premium value unless the misalignment is significantly more than on your example
|
|
Pillar of the Community
United States
1655 Posts |
You are on the right track if you are going to stop looking at every coin for imperfections, because almost all coins have imperfections and they almost always mean nothing. Study up on legit sites like varietyvista.com, doubleddie.com and error-ref.com. I don't know where you got the information on the nickel, but I'd stay away from there.
|
|
Pillar of the Community
United States
3237 Posts |
@nick10 I would only consider major die misalignments to be errors, since no coin is going to have dies that are perfectly parallel to one another, just as no coin will be the exact weight it's intended to be to the perfect atomic mass. Where you draw that line is a bit more hazy with die alignment than with planchet weights, since the mint doesn't state their tolerances, but I personally only consider it to be an error if some of the design is actually missing from the coin as a result of the misalignment.
|
| |
Replies: 20 / Views: 2,068 |
Posted 09/08/2023 3:15 pm
