| Author |
Replies: 16 / Views: 2,388 |
|
Pillar of the Community
United States
5239 Posts |
|
|
|
|
Pillar of the Community
United States
1386 Posts |
Very interesting. I'm going with a lamination flaw or faulty planchet.
|
|
Pillar of the Community
 United States
5239 Posts |
From what I've learned most all de-lamination coins show that they run in a straight line. At least the ones that I have do.
|
|
Bedrock of the Community
United States
62064 Posts |
More of a struck through debris issue. Jim is probably quoting me as I've said the many times. If so, then the coin should be a bit heavier as metal is added to the coin.
|
|
Pillar of the Community
 United States
5239 Posts |
Again, you're right Mr.Coop. Weight is 3.08gm
|
|
Bedrock of the Community
United States
62064 Posts |
Well it should have been over 3.11+.
|
|
Rest in Peace
United States
7075 Posts |
Jim, check your scale. It might need to be recalibrated.
Would an underweight coin suggest damage?
|
|
Pillar of the Community
 United States
5239 Posts |
Buddy, it's spot on. I put an uncirculated 1974D on it and it weighed 3.1gm
|
|
Pillar of the Community
United States
1101 Posts |
Pretty cool either way. I'd own it
|
|
Bedrock of the Community
United States
62064 Posts |
Note how the obverse image you posted looks a bit out of round? at 11:00. Is the reverse complete?
|
|
Pillar of the Community
 United States
5239 Posts |
I'll pull that cent and take reverse pics. It won't be until tomorrow though!
|
|
Bedrock of the Community
United States
62064 Posts |
|
|
Rest in Peace
10197 Posts |
3.11gr +/-.13gr at 3.08 is very close considering wear as is. 3/100 of a gram isn't very much.
|
|
Bedrock of the Community
United States
74662 Posts |
Very nice and interesting find! That's a very good example of a coin being Struck Through Copper Foil Scrape.
Errers and Varietys.
|
|
Pillar of the Community
 United States
5239 Posts |
Here you go Mr. Coop!  
|
|
Bedrock of the Community
United States
62064 Posts |
The devices look a bit smaller, but that would not affect the weight. Why not? The planchet is started and finished with the strike with the same weight on a normal strike. If metal is struck onto the coin, then the coin would be a bit heavier. If there was a lamination, then it would weigh less because of the loss of coin material. But a set of smaller devices, mint marks, die cracks, Cuds, struck through (without the item it was struck through) will not change the weight. The metal is just rearranged to have the same weight going in and coming out a coin. But your coin does show some wear in circulation. But I expected the weight to be a bit higher. (weight + struck through debris) But the planchet may have been a bit light and the struck through didn't change the weight. Thanks for the extra images. (I like exploring all possibilities)
|
| |
Replies: 16 / Views: 2,388 |