| Author |
 Replies: 17 / Views: 902 |
|
New Member
United States
5 Posts |
|
|
|
|
Pillar of the Community
 United States
1339 Posts |
Edited by igwt79
05/11/2025 4:12 pm
|
|
Bedrock of the Community
Canada
20329 Posts |
 To the CCF Looks like a Dryer Coin. Considered damage and adds no value.
|
|
New Member
 United States
5 Posts |
I looked at the pics of Dryer Coins and it does make sense. But this dime is near perfect on all the edges. No nicks or deformations at all. The edge is almost knife sharp. So if it is a Dryer Coin, it has to be the best Dryer Coin ever. |
|
Bedrock of the Community
United States
17495 Posts |
An accurate weight to two decimal places could tell us much. Thanks.
|
|
Valued Member
United States
359 Posts |
Looks like the device (portrait) has been filed away.
|
|
New Member
United States
5 Posts |
I'll get a very accurate weight tomorrow at work. We have scales that read out to .001 grams. I can put it under the microscope also to look for file markings or dents. I'll report what I find. It may just be a Dryer Coin but to my eyes and touch, its almost to perfectly smooth. Except for the knife edges I mean. I would be proud to have the most flawless Dryer Coin ever...lol. |
|
Moderator
 United States
71828 Posts |
to CCF Not a classic Dryer Coin. It looks intentionally reduced. the obverse has been ground/sanded smooth, with the exception of dead center. The reeded edge looks 'worked' like from a rotational mechanical device that reduced the circumference and raised the rims.
|
|
Bedrock of the Community
Canada
20329 Posts |
Whether it is a Dryer Coin or been filed down or anything else doesn't really matter. All that really matters is that it could not have happened during the striking of the coin so it is PMD. Edited by JimmyD
05/11/2025 8:23 pm
|
|
Pillar of the Community
United States
1339 Posts |
Quote:
The reeded edge looks 'worked' like from a rotational mechanical device that reduced the circumference and raised the rims. You could be right... The bottom of my washing machine has a narrow circumferential slit/slot for some reason, and coins fit into it perfectly... I often have to use a small hook to pull them out... they appear very similar to this coin. I don't think I kept any, but if I find one, or next time I dig one out, I'll post it for comparison.
|
|
Bedrock of the Community
United States
59484 Posts |
No matter what happened to it, it's not an error. It's PMD. Worth 10 cents. Errers and Varietys.
|
|
New Member
United States
5 Posts |
I really don't care if it's worth more then .10 cents. It was just interesting to me. After a lifetime of coming across coins that were beat on, filed on, run over by trains, turned into jewelry, drilled..etc, this one just seems strange and wanted to hear your thoughts.
|
|
Pillar of the Community
United States
4035 Posts |
Cost of holding on to it is low and it looks pretty cool and different.
|
|
Bedrock of the Community
United States
13670 Posts |
to the CCF A keeper for curiosity.
Take a look at my other hobby ... http://www.jk-dk.artToo many hobbies .... too much work .... not enough time. |
|
Moderator
United States
71828 Posts |
If it were mine, I would keep it as a curiosity  |
|
Moderator
United States
164037 Posts |
to the Community!
|
| |
Replies: 17 / Views: 902 |
***
Posted 05/11/2025 4:13 pm
